products

WJJ Series Coalescing Dehydration Unit

Short Description:

Remove water/sludge/particles

It is an innovative product developed based on the characteristics of oil with high water content and serious emulsification, combining new coalescence separation and charge balancing technology.

It is mainly used to quickly and efficiently remove large water, gas and impurities in oil. Make the various quality indicators of the oil meet or exceed the new oil standard.


Product Detail

Product Tags

Product Features

The dual charging agglomeration technology increases the filtration level to sub-micron, which can not only filter out all particulate pollutants as small as 0.1 microns in the fluid, but also actively remove them.

Adopt advanced automatic drainage device, no need to manually drain water; low power consumption (total power only 1.1-7.5KW), low operating cost; long continuous running time (over 500 hours);

Filter at room temperature, without heating,simple and compact structure, easy to use and maintain, and can be operated online.

Flow Chart

Technical Data

WJJ_technical-data-1200x337

Working Principle

DCA_Chart_RE1200x517
peel-off_image-1200x388

Dual Charging Technology 

First of all, lubricating oils pass through pre-filter, some of the large-size particles get removed, and the remaining particulate contaminants accompany the oil into the charging and mixing process.

2 paths are set up at the charging and mixing area, and the oil is charged by electrodes with positive and negative charges respectively. The fine particles flowing through are induced positive(+) and negative(-) charges respectively and then mixed together again.

The positive and negative charges interact with each other in the respective electric field, and the positive/negative charged particulates absorb each other and grow up larger and the particulate contaminants become particles gradually and finally are captured and removed by the filters.

1654844004153

Water Coalescencing Separation

Phase 1: coalescence
Typically, coalescing filters made of synthetic fiberglass media. The hydrophilic (Water loving) fibers attract free water droplets. At the intersection of the fibers, water droplets pool together (Coalesce) and growing larger. Once the water droplets are large enough, gravity pulls the droplet to the bottom of the vessel and removed from oil system.

Phase 2: Separation
The synthetic Hydrophobic materials are used as water barrier. Then, the water drops will be isolated in tank when fluid final pass through that dry fluid flow over to next process. The separating filter works with coalescing filter element to remove water effectively.


  • Previous:
  • Next:

  • Write your message here and send it to us
    WhatsApp Online Chat !